Which optical arrangement is this worksheet about?
Corning's December 2002 MT-RJ polarity procedure illustrates duplex system polarity as a transmit-to-receive relationship. Its connector-specific assembly methods are dated and are not instructions for every modern optical system. Substation Drafting is independent and is not affiliated with Corning.
This worksheet is for an actual approved two-fiber duplex link. Single-fiber bidirectional optics, parallel links and other configurations need their own selected equipment evidence. Do not infer a universal port position, wavelength, connector arrangement or fiber color from the cited example.
Sources: Corning Cable Systems: Maintaining system polarity with MT-RJ connectors, Issue 3, December 2002
What should a trace row identify?
Work from the selected transceiver documentation, approved cable schedule and controlled patch records together. Identify the viewing face whenever connector positions are used.
| Trace item | Path A record | Path B record |
|---|---|---|
| Origin | Approved endpoint Tx | Opposite endpoint Tx |
| Equipment interface | Actual selected port and orientation | Actual selected port and orientation |
| Intermediate connections | Patch panel face, port and fiber mapping | Return-direction mapping |
| Cable identity | Approved cable and individual fiber reference | Approved cable and individual fiber reference |
| Destination | Intended remote Rx | Intended original-end Rx |
| Evidence | Device document and controlled schedule | Device document and controlled schedule |
| Disposition | Resolved drawing query and engineer | Resolved drawing query and engineer |
What can a repeated port number conceal?
Illustrative example. A fictional drawing links Panel A port 01 to Panel B port 01. Its cable schedule identifies two fibers, but the drawing does not say which fiber connects Endpoint A Tx to Endpoint B Rx. A front-view panel sketch is being compared with a rear-view termination sketch.
The reviewer records the missing viewing-face and fiber mapping, then obtains the approved end-to-end disposition. A repeated 01 label does not resolve whether the intended Tx/Rx relationship is represented. No real port order, fiber color or patch-cord change is prescribed.
What should remain separate from the drawing check?
Reconcile the two directions without swapping connectors or changing a live link to test an assumption. Link compatibility, loss budget, approved optics and required commissioning evidence are separate engineering and testing questions. A consistent mapping worksheet is not a successful communications test.
Preserve the earlier issue, corrected mapping and affected drawing/schedule revisions. Engineering sign-off is performed only by the registered engineer on the job. Any site work needs the authorized procedures and qualified personnel; do not look into optical fibers or use this guide as a field-work instruction.
Common questions
What else should the bid team know?
Does a matching port number establish polarity?
No. Trace the approved individual paths and endpoints.
Does every optical link use two fibers?
No. Confirm the selected arrangement before using this worksheet.
May a drafter swap a patch cord to close the query?
No. Obtain the authorized engineering disposition and site process.
Primary sources
- Maintaining system polarity with MT-RJ connectors, Issue 3, December 2002Corning Cable Systems